4,000 LPH Tecnoliquid TCL 0423 Ultrafiltration (UF) Membrane Filtration Plant (Year 2023)
Request more information
Description
Available for sale is a Tecnoliquid TCL 0423 Stainless Steel Ultrafiltration (UF) Membrane Filtration and Water Treatment Plant, manufactured in 2023, designed for continuous processing, filtration and concentration of dairy Whey Permeate and Scotta (Ricotta Whey), with a nominal feed capacity of approximately 4,000 litres per hour. Manufactured by Tecnoliquid S.r.l., Italy, this industrial membrane filtration system is constructed on a compact stainless steel skid and incorporates 9 spiral-wound UF membrane elements, housed within three stainless steel pressure vessels.
The plant utilises crossflow (tangential flow) membrane filtration technology to separate the incoming liquid into two streams: permeate and concentrate. The membrane separation process allows the recovery of treated water while directing the concentrated fraction to a separate discharge or collection system.
Designed for applications within the dairy processing, food manufacturing and industrial water treatment sectors, the Tecnoliquid TCL 0423 is particularly suitable for the further treatment and polishing of whey permeate and scotta permeate, including the recovery of process water.
The system is equipped with an integrated PLC-controlled automation system with touchscreen HMI, enabling operators to monitor and adjust processing parameters, pump speeds, operating pressures, filtration cycles and membrane cleaning sequences.
The plant incorporates stainless steel centrifugal feed and recirculation pumps, inverter-controlled pump operation, automatic pneumatic valves, flowmeters, pressure monitoring instrumentation and an integrated membrane cleaning system with a 450-litre AISI 316L stainless steel cleaning tank.
An automatic chemical cleaning system, incorporating alkaline and acid dosing pumps, provides controlled membrane washing and rinsing sequences to maintain filtration performance and assist with the removal of membrane fouling.
Constructed using food-grade stainless steel components, including AISI 316L process pipework, valves and filtration equipment, this Tecnoliquid ultrafiltration system offers a compact and automated solution for dairy permeate processing, membrane separation and industrial process water recovery.
Key Applications
- Dairy whey permeate filtration and concentration
- Ricotta whey (scotta) permeate processing
- Dairy wastewater treatment and process water recovery
- Ultrafiltration of pretreated dairy process liquids
- Whey permeate polishing and purification
- Industrial membrane filtration and liquid separation
- Crossflow membrane filtration applications
- Permeate and concentrate separation
- Food and dairy processing water treatment
- Recovery of reusable process water, subject to required water quality standards
Specification
- Manufacturer: Tecnoliquid S.r.l.
- Model: TCL 0423 (also referenced as TLC 0423 in the manual)
- Year of Manufacture: 2023
- Machine Type: Ultrafiltration / Membrane Filtration Plant
- Filtration Technology: Spiral-Wound Membrane / Crossflow Filtration
- Operation: Continuous Processing
- Nominal Feed Capacity: 4,000 litres/hour (40 quintals/hour, approximately)
- Concentration Ratio: Approximately 2–3 times
- Typical Operating Pressure: 3–4 bar (as stated in the technical specification)
- Pressure Differential: 1–3 bar
- Maximum Membrane Temperature: 50°C
- Internal Volume: 450 litres
- Processing Cycle: 10 hours, plus approximately 3 hours for cleaning
- Total Installed Power: 6 kW (manufacturer's stated figure)
- Electrical Supply: 400 V / 3 Phase / 50 Hz
- Construction: Stainless Steel Skid-Mounted System
Membrane Filtration System
- Number of Membrane Elements: 9
- Membrane Type: Spiral-Wound Polymeric UF Membranes
- Membrane Model: UF6338
- Membrane Dimensions: 6.3" x 38"
- Number of Membrane Pressure Vessels: 3
- Membranes per Vessel: 3
- Pressure Vessel Model: PV84600
- Pressure Vessel Rating: Up to 40 bar
- Vessel Connections: 2" Tri-Clamp
- Vessel Permeate Outlet: 1½" Tri-Clamp
- Membrane Configuration: Single Filtration Loop
- Filtration Method: Crossflow / Tangential Flow
Pumps and Process Equipment
- 1 x Centrifugal Feed Pump
- Feed Pump Motor Power: 2 kW
- 1 x Centrifugal Recirculation Pump
- Recirculation Pump Motor Power: 3 kW
- Recirculation Pump Capacity: 11–29 m³/hour
- 2 x Variable Frequency Inverters for Pump Speed Control
- 1 x AISI 316 Stainless Steel Cartridge Filter Housing
- 1 x Concentrate Needle Regulation Valve
- Stainless Steel AISI 316L Process Pipework
- Food-Grade Stainless Steel Process Valves
- Pneumatically Operated Process Valves
- Separate Permeate and Concentrate Outlet Connections
Membrane Cleaning System
- Integrated Automatic Membrane Cleaning System
- Stainless Steel Cleaning Tank: 450 Litres
- Cleaning Tank Material: AISI 316L
- 1 x Alkaline Chemical Dosing Pump
- 1 x Acid Chemical Dosing Pump
- Dosing Pump Capacity: 100 litres/hour each
- Maximum Dosing Pump Pressure: 4 bar
- Automatic Chemical Dosing and Rinsing Sequences
- pH-Controlled Chemical Cleaning
- Alkaline, Acid and Enzymatic Cleaning Procedures
- Automatic Pre-Production and Post-Production Rinsing
- Membrane Preservation and Standby Procedures
Controls and Instrumentation
- Integrated Electrical Control Panel
- PLC-Based Automatic Process Control
- Touchscreen Human Machine Interface (HMI)
- Variable Speed Pump Control via Inverters
- Automatic Pneumatic Valve Operation
- 2 x Flowmeters for Permeate and Concentrate Monitoring
- 3 x Electronic Pressure Transmitters
- Pressure Transmitter Measuring Range: 0–40 bar
- pH / Redox Controller with Analogue Output
- Stainless Steel pH Electrode Assembly
- PT100 Temperature Sensor
- Level Monitoring Instrumentation
- Automatic Process Cycle Selection
- Automatic Membrane Cleaning Programmes
- Manual and Automatic Operating Functions
- Emergency Stop and Standby Controls
- Process Alarm Monitoring and Safety Shutdown Functions
Safety Features
- Low Feed Pressure Protection
- Pump Fault Monitoring
- Inverter Fault Monitoring
- High Pressure Protection
- High Differential Pressure Protection
- Low Compressed Air Pressure Alarm
- Audible and Visual Alarm Indication
- Automatic Shutdown of Pumps and Valves in Alarm Conditions
Dimensions
- Length: 3,650 mm
- Width: 1,350 mm
- Height: 2,500 mm
- Approximate Empty Weight: 600 kg
- Installation: Stainless Steel Skid-Mounted
Country of Manufacture
Italy – Tecnoliquid S.r.l.





Instagram
YouTube
LinkedIn