4,000 LPH Tecnoliquid TCL0523 Reverse Osmosis (RO) Polisher Membrane Filtration Plant (Year 2023)
Request more information
Description
TecnoLiquid TCL0523 fully automatic, skid-mounted 9 Membrane Reverse Osmosis (RO) Polisher and Whey Permeate Concentration Plant, designed for continuous processing, purification and concentration of whey permeate and dairy processing liquids.
Manufactured in Italy by TecnoLiquid S.r.l., this industrial reverse osmosis filtration system is designed to process approximately 4,000 litres per hour of whey permeate, with a nominal concentration ratio of approximately 7–8 times.
The plant incorporates nine spiral-wound reverse osmosis membranes, each measuring 8" x 38", installed within three high-pressure stainless steel membrane vessels, providing a total membrane filtration surface area of approximately 297 m².
Operating on the principle of high-pressure crossflow membrane filtration, the system separates incoming whey permeate into two streams: purified water (RO permeate) and a concentrated liquid stream. The recovered water can be transferred to an external process water storage tank, whilst the concentrated stream can be collected or directed for further processing, depending on the application.
The complete RO membrane filtration plant is mounted on a compact stainless steel skid with food-grade AISI 316L stainless steel process pipework, valves and associated components.
The system is equipped with a fully integrated PLC control system and touchscreen HMI operator interface, providing automatic control of the concentration process, pneumatic valves, pumps, operating parameters and membrane cleaning sequences.
Two inverter-controlled pumps allow adjustment of the operating pressure, circulation flow and concentration performance, whilst an adjustable needle valve on the concentrate discharge line provides additional control over the concentration ratio.
The plant also features an integrated 450-litre stainless steel CIP cleaning tank, automatic chemical dosing pumps and programmed membrane cleaning cycles, helping maintain membrane performance and hygienic operating conditions.
Suitable for dairy processors, cheese manufacturers, whey processing facilities and industrial food processing operations requiring reverse osmosis filtration, whey permeate concentration, water recovery and dairy by-product processing.
Key Applications
- Whey permeate concentration in dairy processing plants.
- Reverse osmosis filtration and polishing of whey permeate.
- Cheese whey and ricotta whey (scotta) permeate processing.
- Concentration of dairy by-products prior to further processing.
- Recovery of purified process water from whey permeate.
- Reduction of liquid volumes through membrane concentration.
- Dairy wastewater stream treatment and water recovery, subject to feed suitability.
- Integration into existing whey ultrafiltration (UF), reverse osmosis (RO) and dairy membrane processing systems.
Technical Specifications
- Manufacturer: TecnoLiquid S.r.l. Italy
- Model: TCL0523 / TLC0523 (as referenced in the manufacturer's documentation).
- Machine Type: Reverse Osmosis (RO) Polisher / Membrane Concentration Plant.
- Nominal Feed Capacity: 4,000 litres/hour (40 quintals/hour, approximately, based on liquid density).
- Number of RO Membranes: 9.
- Membrane Type: Spiral-wound polymeric reverse osmosis membranes.
- Membrane Dimensions: 8" x 38".
- Membrane Surface Area: 33 m² per membrane.
- Total Membrane Surface Area: Approximately 297 m².
- Number of Membrane Vessels: 3.
- Membranes per Vessel: 3.
- Membrane Vessel Pressure Rating: Up to 40 bar.
- Typical RO Operating Pressure: 16–25 bar.
- Operating Pressure Differential: 1–4 bar.
- Nominal Concentration Ratio: Approximately 7:1 to 8:1.
- Internal System Volume: Approximately 450 litres.
- Maximum Membrane Operating Temperature: 50°C.
- Typical Processing Cycle: 10 hours, excluding cleaning.
- Typical Cleaning Cycle: Approximately 3 hours.
- Total Installed Power: 9.5 kW (manufacturer's stated figure).
- Electrical Supply: 400 V / 50 Hz / 3 Phase.
- Construction: Stainless steel skid with food-grade AISI 316L stainless steel process components.
- Control System: PLC with touchscreen HMI.
- Pump Speed Control: Variable frequency drives (VFD / inverter).
- Cleaning System: Automatic membrane cleaning with integrated chemical dosing.
Main Components and Equipment
Reverse Osmosis Membrane System
- 3 x stainless steel high-pressure membrane vessels.
- 9 x spiral-wound sanitary RO membrane elements, 8" x 38".
- 297 m² total installed membrane surface.
Feed, High-Pressure and Recirculation Pumps
1 x stainless steel horizontal multistage centrifugal feed pump.
- Model: 5HM05S07T5RVBE.
- Motor power: 0.85 kW.
- Flow range: 40–142 litres/minute.
1 x stainless steel vertical multistage high-pressure pump.
- Model: 5SV3N55T/D.
- Motor power: 5.5 kW.
- Flow range: 2.4–8.5 m³/hour.
- Inverter-controlled operation.
1 x stainless steel vertical multistage recirculation pump.
- Model: 22SV03N030T/D.
- Motor power: 3 kW.
- Flow range: 11–29 m³/hour.
- Inverter-controlled operation.
Integrated CIP Cleaning System
- 1 x 450-litre AISI 316L stainless steel cylindrical cleaning tank.
- 1 x alkaline detergent dosing pump.
- 1 x acid detergent dosing pump.
- Chemical dosing pump capacity: 100 litres/hour each.
- Chemical dosing pump maximum pressure: 4 bar.
- Automatic alkaline and acid membrane cleaning programmes.
- Provision for manual enzymatic cleaning.
- Automatic pre-production and post-production rinsing cycles.
- Integrated pH monitoring and chemical dosing control.
- Cleaning temperature regulation through the described water/steam heat exchange arrangement.
Instrumentation and Process Control
- PLC-controlled automatic processing system.
- Touchscreen HMI operator interface.
- Variable frequency drives for pump speed regulation.
- Local flowmeters for permeate and concentrate measurement.
- Electronic pressure transmitters, 0–40 bar.
- Pressure differential monitoring across the membrane system.
- pH/Redox controller with analogue output.
- Stainless steel in-line pH electrode.
- PT100 temperature sensor.
- Level transmitter.
- Pneumatically operated stainless steel process valves.
- Manual needle valve for concentrate flow and pressure adjustment.
- Stainless steel cartridge prefiltration housing.
- Automatic process alarms and safety shutdown functions.
- Manual and automatic operating modes.
Control System and Automation
The TecnoLiquid TCL0523 RO Polisher is equipped with a PLC-based automatic control system incorporating a touchscreen HMI for convenient operation and process monitoring.
The control system provides:
- Automatic start-up and shutdown sequences.
- Selection of pre-programmed processing and cleaning cycles.
- Adjustment of process parameters and operating times.
- Inverter control of high-pressure and recirculation pumps.
- Automatic operation of pneumatic valves.
- Monitoring of pressure, temperature, flow and pH.
- Automatic membrane rinsing and chemical cleaning sequences.
- Visual and audible alarm indications.
- Automatic shutdown in the event of low feed pressure, high operating pressure, excessive differential pressure, pump faults, inverter faults or low compressed air pressure.
- Standby operation with controlled pump shutdown.
Dimensions and Weight
- Length: 3,800 mm.
- Width: 1,300 mm.
- Height: 2,500 mm.
- Approximate Empty Weight: 600 kg.
- Installation: Stainless steel skid-mounted system.
Country of Manufacture
Italy – TecnoLiquid S.r.l.





Instagram
YouTube
LinkedIn